3/4’’ DUAL PLANE HOSE END SWIVEL FOR CABLE AUTOMATION SYSTEMS FOR AVANCE & ZVA TYPE NOZZLES
INT.11.34.28.36.15
› Aluminium body and elbow
› Zinc Insert
› Custom design for Avance and ZVA type nozzles
› Designed to be used with dispenser automation
systems with cable
› Aluminium protection cap and stainles steel flexible
spiral for aut. cable protection
› Dual 0-ring sealing for an outstanding leak-tight
performance
› Teflon bearing resistant to all known kinds of liquid fuel
› Atex Approved
› Original and appealing design
› 270 degrees smooth swivel action both on the nozzle
and on the hose end
ELECTRIC GLEND FOR SUBMERSIBLE TURBINE PUMPS
INT.09.00.38.00.01
› Brass body with nickel plating finish
› Leak-tight O-Ring
› Designed to be used with cables with diameters
10-16mm
› Suitable to use with all submersible turbine pumps
› Atex Approved
3/4”F X 1”M REDUCER
INT.07.341.00.24.01
› Brass body with nickel plating finish
› Option to have aluminium body
› NPT, BSP, BSPT and metric thread options
› Male or Female thread options
1 1/2’’ CHECK VALVE
INT.09.112.12.00.05
› 1 1/2”Fx1 1/2”F
› Cast iron body
› Brass bearing
› Galvanized Coated
› Used on underground storage tanks for suction
systems
2’’ CHECK VALVE
INT.09.112.12.00.05
› 2”Fx2”F
› Cast iron body
› Brass bearing
› Galvanized Coated
› Used on underground storage tanks for suction
systems
3’’ BRONZE FILL/INDICATOR ADAPTOR
TS.08.003.00.04
› Designed to be used with 3” tight fill caps
› Bronze body
› Leak tight gasket
4’’ BRONZE FILL/INDICATOR ADAPTOR
TS.08.004.00.04
› Designed to be used with 4” tight fill caps
› Bronze body
› Leak tight gasket
4’’ ALUMINIUM FILL/INDICATOR ADAPTOR
INT.08.004.00.00.06
› Designed to be used with 4” tight fill caps
› Aluminium body
› Leak tight gasket
4’’X3” ALUMINIUM FILL/INDICATOR ADAPTOR
INT.08.043.00.00.06
› 3”Fx4” Reducer Adaptor
› 3” on the fill pipe and 4” on the tight fill cap end
› Designed to be used with 4” tight fill caps
› Aluminium body
› Leak tight gasket
3/4” BREAKAWAY
INT.10.34.00.00.02
› 3/4”Fx3/4”F
› Aluminium body
› Leak tight viton O-Ring
› Breakaway pull force between 80 and 120 kg.
› 4 bar testing pressure
› Physically designed to keep the fuel from spilling after
separation, via two sided poppet
› Rubber protection cover
› ATEX approved
1” BREAKAWAY
INT.10.34.00.00.02
› 1”Fx1”F
› Aluminium body
› Leak tight viton O-Ring
› Breakaway pull force between 80 and 120 kg.
› 4 bar testing pressure
› Physically designed to keep the fuel from spilling after
separation, via two sided poppet
› Rubber protection cover
› ATEX approved